Mercury 1997 Mystique User Manual Download Page 93 | Manualshive

Page: 93 / 279

background image

92

% [SS05400(ALL)12/95]

Dual Locking Mode Lap/Shoulder Belt Retractor

[SS05500(ALL)12/95]

The front passenger seat and the rear outer seat combination lap
and shoulder belts are equipped with a dual locking mode
retractor on the shoulder belt portion of the lap/shoulder belt.
This retractor can be switched from vehicle sensitive
(emergency) locking mode to automatic locking mode by pulling
the belt webbing all of the way out of the retractor. The
retractor modes function as follows.

*

[SS05600(ALL)02/96]

Vehicle sensitive (emergency) locking mode

[SS05700(ALL)12/95]

In this operating mode, the lap/shoulder belt retractor will
allow the occupant freedom of movement, locking tight only on
hard braking, hard cornering or impacts of approximately
5 mph (8 km/h) or more.

%

*

[SS05800(ALL)02/96]

Automatic locking mode

*

[SS05900(ALL)12/95]

This mode must be used when installing a child seat on the
front passenger seat and rear seats where dual locking retractors
are provided. To switch the retractor from the emergency
locking mode to the automatic locking mode, perform the
following steps:

*

[SS06000(ALL)03/96]

R

WARNING

Rear-facing child seats or infant carriers should never be
placed in the front seats.

*

[SS06100(ALL)02/96]

1.

Buckle the lap/shoulder combination belt.

*

[SS06200(ALL)12/95]

2.

Grasp the shoulder portion of the belt and pull downward
until all of the belt is extracted and a click is heard. At this
time, the retractor is in the automatic locking mode (child
restraint mode).

*

[SS06300(ALL)12/95]

3.

Allow the belt to retract. A clicking sound will be heard as
the belt retracts. This indicates that the retractor is in the
automatic locking mode.

File:06cdssz.ex

Update:Thu May 23 13:47:54 1996

«
...
91
92
93
94
95
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: UltraGauge Pages: 55

PRIME DESIGN VRI3-E-PM11

Brand: Safe Fleet Pages: 12

Brand: Whispbar Pages: 15

Brand: Globalsat Pages: 2

Wireless Handsfree Car Kit

Brand: Wagan Pages: 20

Brand: minnid Pages: 44

Brand: Xhorse Pages: 48

HU-4421-XL-SDK01

Brand: FALCON RIDGE Pages: 5

Brand: Bestop Pages: 5

Brand: PowerMadd Pages: 3

Security Cage Kit

Brand: Toro Pages: 8

Brand: Tactik Pages: 4

Brand: banks Pages: 76

Brand: ULTIMATE SPEED Pages: 26

Brand: UCANDAS Pages: 4

Brand: Subaru Pages: 9

TX-STAMP-4-TC01

Brand: Over Armour Offroad Pages: 4

Nemesis Ultra FNU200

Brand: Purpleline Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands