Mercury 1997 Mystique User Manual Download Page 133 | Manualshive

Page: 133 / 279

background image

132

pressed, the transaxle control indicator light will illuminate
(O/D OFF) on the instrument panel. When this O/D OFF is
illuminated the transaxle will upshift and downshift from first
through third gears and provide coast braking in second and
third gears.

[GF06900(ALL)12/95]

To return the transaxle to normal operation (first through fourth
gears) depress the TCS again. This switch may be used to cancel
overdrive any time the vehicle is being driven. Each time your
vehicle is started, the overdrive system will automatically be in
the normal overdrive mode and the light will not be
illuminated.

[GF07000(ALL)12/95]

When to use D (Overdrive — without Transaxle Control
Switch Activated)

*

[GF07100(ALL)12/95]

D (Overdrive) is the usual driving position for an automatic
overdrive transaxle. It automatically upshifts or downshifts as
the vehicle speeds or slows.

*

[GF07200(ALL)12/95]

However, D (Overdrive) also shifts into a fourth gear — an
overdrive gear — when your vehicle cruises at a consistent
speed for any length of time. This fourth gear will increase your
fuel economy when you travel at cruising speeds.

[GF07300(ALL)12/95]

When to use D (Drive — with Transaxle Control Switch
activated)

[GF07400(ALL)12/95]

D (Overdrive) may not be appropriate for certain terrain. If the
transaxle shifts back and forth between third and fourth gears
while you are driving on hilly roads or if your vehicle requires
additional power for climbing hills, depress the TCS. D (Drive)
also gives more engine braking to slow your vehicle on
downgrades than D (Overdrive).

File:09cdgfz.ex

Update:Fri May 24 08:25:56 1996

«
...
131
132
133
134
135
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: Panasonic Pages: 2

CYRC50U - UNIVERSAL REAR-VIEW CAMERA

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 12

Brand: Dakota Digital Pages: 2

Brand: Dakota Digital Pages: 7

Brand: M7 SPEED Pages: 11

Brand: JANE Pages: 21

SmartDiag2GO GD201-O

Brand: OCTO Pages: 5

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Wireless Handsfree Car Kit

Brand: Wagan Pages: 20

Brand: Fab Fours Pages: 13

Brand: Motoalliance Pages: 5

Brand: Cadillac Pages: 529

Brand: Toro Pages: 16

Brand: Cadillac Pages: 20

Brand: Pyle Pages: 8

Brand: Toyota Pages: 295

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands