Mercury 1997 Mystique, User Manual

Page: 29 / 279

Electronic Sound Systems
27
*
[AS04350(ALL)02/96]
Activate Auto Memory Store by pushing the “AUTO PRESET”
button once. Your radio will set the first five strong stations of
the band you are in (AM, FM1 or FM2) into the memory
buttons. The display will show “AUTO,” then run through the
frequencies, stopping momentarily on the stations being set into
the memory buttons. The radio is now in the “AUTO” mode
and the display will show “AUTO” each time a preset is
activated.
*
[AS04450(ALL)10/95]
NOTE: If there are fewer than five strong stations in the
frequency band, the remaining unfilled buttons will
store the last strong station detected on the band.
*
[AS04550(ALL)03/96]
After all stations have been filled, the radio will begin playing
the station stored on memory button 1.
*
[AS04560(ALL)02/96]
To deactivate the Auto Memory Store mode and return to the
manually-set memory button stations (or those stations set using
Auto Memory Load), simply push the “AUTO PRESET” button.
Display will show “AUTO” then “OFF.” The next time Auto
Memory Store is activated on that band, the radio will store the
next set of five strong stations.
*
[AS04600(ALL)10/95]
Adjusting the tone balance and speaker output of your
radio
*
[AS04700(ALL)02/96]
■
Increasing or decreasing bass response
[AS04750(ALL)07/94]
Push the “AUDIO” button repeatedly until the display reads
“BASS”. Push the top (+) of the “VOLUME” button to
increase bass (more “lows”), and push the button (
s
) to
decrease bass (less “lows”).
*
[AS04800(ALL)02/96]
■
Increasing or decreasing treble response
[AS04900(ALL)07/94]
Push the “AUDIO” button repeatedly until the display reads
“TREB”. Push the top (+) of the “VOLUME” button to
increase treble (more “highs”), and push the bottom (
s
) to
decrease treble (less “highs”).
File:04cdasz.ex
Update:Fri May 24 08:25:06 1996