Mercury 1997 Mystique User Manual Download Page 203 | Manualshive

Page: 203 / 279

background image

Maintenance and Care

203

%

*

[MC21400(ALL)01/96

]

Treadwear

*

[MC21500(ALL)01/96]

The treadwear grade is a comparative rating based on the wear
rate of the tire when tested under controlled conditions on a
specified government test course. For example, a tire graded 150
would wear one and one-half (1 1/2) times as well on the
government course as a tire graded 100. The relative
performance of tires depends upon the actual conditions of their
use, however, and may depart significantly from the norm due
to variations in driving habits, service practices and differences
in road characteristics and climate.

*

[MC21600(ALL)01/96]

Traction A B C

*

[MC21700(ALL)05/96]

The traction grades, from highest to lowest, are A, B, and C,
and they represent the tire’s ability to stop on wet pavement as
measured under controlled conditions on specified government
test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.

*

[MC21750(ALL)05/96]

R

WARNING

The traction grade assigned to this tire is based on
braking (straightahead) traction tests and does not
include cornering (turning) traction.

File:11cdmcz.ex

Update:Wed May 22 12:13:37 1996

«
...
201
202
203
204
205
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Brand: Toyota Pages: 56

Brand: Porsche Pages: 192

10-8002-C11998B

Brand: Saleen Pages: 12

2013 Buick Verano

Brand: Buick Pages: 5

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: Subaru Pages: 99

Brand: Ford Pages: 368

Brand: Thule Pages: 8

Brand: U.S. General Pages: 8

Brand: MULTILIFT Pages: 62

RearSight 250-8308

Brand: Rostra Pages: 2

Brand: PEUGEOT Pages: 232

Brand: Scosche Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands