Mercury 1997 Mystique User Manual Download Page 65

Page: 65 / 279

[CF15200(ALL)03/96]

Speed Control (If equipped)

[CF15225(ALL)02/96]

10-1/2 pica

art:0000262-D

The speed control switches on the steering wheel

[CF15250(ALL)05/96]

To Turn Speed Control On

[CF15275(ALL)05/96]

Press the on button.

[CF15300(ALL)05/96]

The speed of the vehicle cannot be automatically controlled until
the vehicle speed is at or above 30 mph (48 km/h).

[CF15600(ALL)05/96]

WARNING

Do not use the speed control in heavy traffic or on roads
that are winding, slippery, or unpaved.

[CF15650(ALL)02/96]

WARNING

Do not shift to N (Neutral) with the speed control on.

[CF15675(ALL)05/96]

To Turn Speed Control Off

[CF15701(ALL)03/96]

Press the OFF switch.

[CF15800(ALL)05/96]

To Set a Speed

[CF15901(ALL)05/96]

With the speed control on, press the Set Accel switch to set and
store the instantaneous vehicle speed.

File:05cdcfz.ex

Update:Fri May 31 14:31:06 1996

Summary of Contents for 1997 Mystique
























































































































































































































































































Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands

Mercury 1997 Mystique, User Manual

Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands