Mercury 1997 Mystique User Manual Download Page 36 | Manualshive

Page: 36 / 279

background image

34

*

[AS08700(ALL)04/96]

■

Do not expose the disc to direct sunlight or heat sources
such as defroster and floor heating ducts. Do not leave any
discs in a parked car in direct sunlight where there may be a
considerable rise in temperature or damage may result.

*

[AS08800(ALL)04/96]

■

After playing, store the disc in its case.

*

[AS08900(ALL)04/96]

■

If a disc has already been inserted, do not try to insert
another disc. Doing so may damage the disc player.

*

[AS09000(ALL)04/96]

■

Do not insert anything other than a disc into the disc player.

*

[AS09100(ALL)04/96]

CAUTION:

The use of optical instruments with this product

will increase eye hazard as the laser beam used in this compact
disc player is harmful to the eyes. Do not attempt to
disassemble the case. Refer servicing to qualified personnel only.

*

[AS09200(ALL)08/95]

Common Operating Conditions of Your CD Player

*

[AS09300(ALL)04/96]

The following information is designed to help you recognize
typical situations that could be mistakenly interpreted as
mechanical malfunctions of the disc player.

*

[AS09400(ALL)04/96]

■

A disc is already loaded.

*

[AS09500(ALL)04/96]

■

The disc is inserted with the label surface downward.

*

[AS09600(ALL)04/96]

■

The disc is dusty or defective.

*

[AS09700(ALL)04/96]

■

The player’s internal temperature is above 167˚F (75˚C).
Allow the player to cool off before operating.

*

[AS09800(ALL)08/95]

■

Different manufacturers of compact discs may produce discs
with different dimensions or tolerances, some of which may
not be within industry standards or in accordance with the
CD format. Because of this, a new disc that is free of dust
and scratches could be defective and may not play on your
Ford Compact Disc Player.

File:04cdasz.ex

Update:Fri May 24 08:25:06 1996

«
...
34
35
36
37
38
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: Happy Orange Pages: 2

Brand: Cadillac Pages: 3

Brand: Cadillac Pages: 12

Brand: Cadillac Pages: 106

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 326

Brand: Cadillac Pages: 28

ESCALADE - BROCHURE 2009

Brand: Cadillac Pages: 602

ESCALADE ESV 2004

Brand: Cadillac Pages: 20

ESCALADE EXT 2005

Brand: Cadillac Pages: 460

CT6 SUPER CRUISE 2018

Brand: Cadillac Pages: 8

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 337

Brand: HALE Pages: 44

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 2

BT150 - Headset - Over-the-ear

Brand: Jabra Pages: 2

Brand: Quadratec Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands