Mercury 1997 Mystique User Manual Download Page 122 | Manualshive

Page: 122 / 279

background image

Starting

121

*

[TO05200(ALL)01/96]

R

WARNING

Extended idling at high engine speeds can produce very
high temperatures in the engine and exhaust system,
creating the risk of fire or other damage.

*

[TO05300(ALL)01/96]

R

WARNING

Do not park, idle, or drive your vehicle in dry grass or
other dry ground cover. The emission system heats up
the engine compartment and exhaust system, which can
start a fire.

*

[TO05400(ALL)01/96]

If you consistently start your vehicle in subzero temperatures,
use an engine block heater (if your vehicle has this option).

%

*

[TO05500(ALL)01/96]

Engine Block Heater (If equipped)

*

[TO05600(ALL)01/96]

Engine block heaters are strongly recommended if you live in a
region where temperatures reach -10˚F (-23˚C) or below. An
engine block heater warms the engine coolant, which improves
starting, warms up the engine faster, and allows the
heater-defrost system to respond quickly.

*

[TO05700(ALL)01/96]

To turn the heater on, simply plug it into a grounded 110-volt
outlet. Ford recommends that you use a 110-volt circuit that is
protected by a ground fault circuit interrupter.

*

[TO05800(ALL)01/96]

R

WARNING

To prevent electrical shock, do not use your heater with
ungrounded electrical systems or two-pronged (cheater)
adapters.

*

[TO05900(ALL)01/96]

For best results, plug the heater in at least three hours before
you start your vehicle. Using the heater for longer than three
hours will not damage the engine, so you can plug it in at night
to start your vehicle the following morning.

File:08cdtoz.ex

Update:Fri May 24 08:25:15 1996

«
...
120
121
122
123
124
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: ZAPTEC Pages: 240

Brand: Acdeos Pages: 38

Titanium Series

Brand: Fass Pages: 13

Brand: Daihatsu Pages: 43

Brand: Falcon Pages: 8

Brand: Vauxhall Pages: 2

Brand: GOgroove Pages: 9

Brand: Horn Tools Pages: 6

Brand: BESAFE Pages: 4

Brand: B-Speech Pages: 24

Stratus LHD 1997

Brand: Chrysler Pages: 1534

Brand: Gator Pages: 8

Vantage 12 Series

Brand: Ecco Pages: 5

Brand: AC Schnitzer Pages: 16

Brand: Actia Pages: 102

Brand: GROM Audio Pages: 20

Brand: SuperATV Pages: 2

Brand: Kargo Master Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands