manualshive.com logo in svg

Mercury 1997 Mystique, User Manual

The user-friendly Mercury 1997 Mystique User Manual is essential for all owners of this remarkable vehicle. Providing step-by-step instructions and helpful tips, this comprehensive manual enables users to effortlessly maintain and operate their Mystique. Download this manual for free from manualshive.com and unleash the full potential of your car.

Share
Download
background image

228

%

*

[CS00900(ALL)01/96]

Vehicle Storage

*

[CS01000(ALL)01/96]

Maintenance Tips

*

[CS01100(ALL)01/96]

If you plan on storing your vehicle for an extended period of
time (60 days or more), refer to the following maintenance
recommendations to ensure your vehicle stays in good operating
condition.

*

[CS01200(ALL)01/96]

General

*

[CS01300(ALL)01/96]

■

Store all vehicles in a dry, ventilated place.

*

[CS01400(ALL)01/96]

■

Protect from sunlight, if possible.

*

[CS01500(ALL)01/96]

■

If vehicles are stored outside, they require regular
maintenance to protect against rust and damage.

*

[CS01600(ALL)01/96]

Body

*

[CS01700(ALL)01/96]

■

Wash vehicle thoroughly to remove dirt, grease, oil, tar or
mud from exterior surfaces, rear wheel housing and
underside of front fenders.

*

[CS01800(ALL)01/96]

■

Periodically wash vehicles stored in exposed locations.

*

[CS01900(ALL)01/96]

■

Touch-up raw or primed metal to prevent rust.

*

[CS02000(ALL)01/96]

■

Cover chrome and stainless steel parts with a thick coat of
auto wax to prevent discoloration. Re-wax as necessary when
the vehicle is washed.

*

[CS02100(ALL)01/96]

■

Lubricate all hood, door and trunk lid hinges and latches
with a light grade oil.

*

[CS02200(ALL)01/96]

■

Cover interior soft trim to prevent fading.

*

[CS02300(ALL)01/96]

■

Keep all rubber parts free from oil and solvents.

File:12cdcsz.ex

Update:Fri Sep 27 10:56:28 1996

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Qube AP1 Supplemental Instructions preview
AP1
Brand: Qube Pages: 19
Cadillac 2000 Warranty And Owner Assistance Information preview
2000
Brand: Cadillac Pages: 32
Kathrein DDA Series User Manual preview
DDA Series
Brand: Kathrein Pages: 7
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
Yakima RimROC Instructions Manual preview
RimROC
Brand: Yakima Pages: 12
Axxess AXDSPX-VW1 Installation Instructions Manual preview
AXDSPX-VW1
Brand: Axxess Pages: 16
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Club Car TransPorter 4 Maintenance And Service Manual preview
TransPorter 4
Brand: Club Car Pages: 286
Metra Electronics 99-5026 Installation Instructions Manual preview
99-5026
Brand: Metra Electronics Pages: 20
Mazda 3 Facelift 2006 Training Manual preview
3 Facelift 2006
Brand: Mazda Pages: 94
Volvo M3602654 Installation Instructions Manual preview
M3602654
Brand: Volvo Pages: 10
Vauxhall 2013 Zafira Tourer Owner'S Manual preview
2013 Zafira Tourer
Brand: Vauxhall Pages: 289
Westin 33-1920 Instructions preview
33-1920
Brand: Westin Pages: 3
Metra Electronics 99-7804 Installation Instructions Manual preview
99-7804
Brand: Metra Electronics Pages: 10
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
Beeper KMX250 Quick Manual preview
KMX250
Brand: Beeper Pages: 2

Brands by name

Popular brands

Load more brands