Mercury 1997 Mystique User Manual Download Page 60

Page: 60 / 279

Controls and Features

[CF11950(ALL)02/96]

The Turn Signal Lever

[CF11975(ALL)02/96]

You can use the turn signal lever on the left side of the steering
column to:

[CF12000(ALL)02/96]

■

operate the turn signals and cornering lamps

[CF12100(ALL)03/96]

■

turn the high beams on/off

[CF12200(ALL)03/96]

■

flash the lamps

[CF12300(ALL)01/96]

Turn Signals

[CF12400(ALL)12/95]

10-1/2 pica

art:0001186-D

The turn signal lever

[CF12500(ALL)01/96]

Move the lever up to signal a right turn. Move it down to
signal a left turn. The corresponding indicator light in the
instrument cluster will flash.

[CF12600(ALL)01/96]

If the turn signal stays on after you turn, move the lever back
to the center (off) position.

[CF12700(ALL)01/96]

For lane changes, move the lever far enough to signal but not to
latch. The lever will return to the off position when you release
it.

File:05cdcfz.ex

Update:Fri May 31 14:31:06 1996

Summary of Contents for 1997 Mystique
























































































































































































































































































Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands

Mercury 1997 Mystique, User Manual

Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands