Mercury 1997 Mystique User Manual Download Page 143 | Manualshive

Page: 143 / 279

background image

142

%

*

[GF16000(ALL)12/95]

Connecting the trailer’s brakes

*

[GF16100(ALL)12/95]

Electric brakes and manual, automatic, or surge-type hydraulic
brakes are safe if you install them properly and adjust them
according to the manufacturer’s instructions. Be sure that your
trailer’s brakes meet local and federal regulations.

*

[GF16200(ALL)01/96]

R

WARNING

Do not connect a trailer’s hydraulic brake system directly
to your vehicle’s brake system. Your vehicle may not
have enough braking power and your chances of having
a collision greatly increase.

%

*

[GF16300(ALL)12/95]

Connecting the trailer’s lights

*

[GF16400(ALL)12/95]

Do not connect a trailer’s lighting system wiring directly to
your vehicle’s lighting system wiring.

To get the proper

equipment for hooking up your trailer’s lights, see your local
trailer dealer and your Ford dealer. Be sure to follow their
instructions carefully.

*

[GF16500(ALL)12/95]

If you do not install trailer lights correctly, you may cause
damage to the vehicle’s lighting system.

%

*

[GF16600(ALL)01/96]

Driving While You Tow

*

[GF16700(ALL)01/96]

Be especially careful when driving while you tow a trailer.
Never drive faster than 45 mph (70 km/h) when you tow in
hilly country on hot days. Also, anticipate stops so that you can
brake gradually.

[GF16800(ALL)12/95]

If your vehicle has a manual transaxle and you are towing a
trailer, you should select gear positions which will avoid jerking
or excessive engine speed. If you need to drive excessively in 1
(First) or 2 (Second), it may indicate that the trailer is too big or
heavily loaded for your vehicle’s drivetrain. Continuous driving
in these two gears while towing a trailer is not recommended.

File:09cdgfz.ex

Update:Fri May 24 08:25:56 1996

«
...
141
142
143
144
145
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: Qube Pages: 19

Brand: Cadillac Pages: 32

Brand: LaserTrack Pages: 12

Brand: Camcar Pages: 6

Brand: Warrior Winches Pages: 17

Brand: Haibang Pages: 6

Brand: STC Pages: 6

Brand: Cadillac Pages: 34

Brand: Sears Pages: 41

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Brand: Calix group Pages: 4

INDICA eV2 XETA CNG

Brand: TATA Motors Pages: 24

Brand: PAC Pages: 5

Brand: Percon Pages: 49

Brand: Ford Pages: 585

Brand: Whispbar Pages: 14

Brand: Rhino-Rack Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands