Mercury 1997 Mystique User Manual Download Page 199 | Manualshive

Page: 199 / 279

background image

Maintenance and Care

199

[MC17200(ALL)12/95]

5.

Slide the filter out of the housing, replace with the new
filter, and slide the housing and passenger compartment air
filter back into place. Reinstall the clips on the housing.

[MC17210(ALL)12/95]

6.

Replace the grille and wiper arms.

%

*

[MC17300(ALL)02/96]

Wiper Blades

*

[MC17400(ALL)01/96]

Check the windshield wiper blades at least twice a year. Also
check them whenever they seem less effective than usual.
Substances such as tree sap and some hot wax treatments used
by commercial car washes reduce the effectiveness of wiper
blades.

*

[MC17500(ALL)01/96]

If the blades do not wipe properly, clean both the windshield
and the wiper blades. Use undiluted windshield washer solution
or a mild detergent. Rinse thoroughly with clear water. Do not
use fuel, kerosene, paint thinner, or other solvents to clean your
wiper blades. These will damage your blades.

*

[MC17600(ALL)01/96]

To make reaching the wiper blades easy, simply turn the
ignition to the ACC position and turn your wipers on. Wait for
them to reach a vertical position and turn the ignition to the
OFF position. Do not move the wipers manually. Manually
moving the wipers across the windshield may damage them.

*

[MC17700(ALL)02/96]

Wiper blade replacement

*

[MC17800(ALL)01/96]

If the wiper blades still do not work properly after you clean
them, you may need to replace the wiper blade assembly or the
blade element. When replacing the wiper blade assembly, blade
refill, or wiper arm always use a Motorcraft part or equivalent.
To replace the blades, follow the instructions that come with
them.

File:11cdmcz.ex

Update:Wed May 22 12:13:37 1996

«
...
197
198
199
200
201
...
»

Summary of Contents for 1997 Mystique
























































































































































































































































































Reviews:

No comments

Related manuals for 1997 Mystique

Brand: AAMP of America Pages: 6

Brand: Code 3 Pages: 8

Brand: Metra Electronics Pages: 4

REARSIGHT OnStar 250-8822

Brand: Rostra Pages: 2

Brand: kincrome Pages: 6

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

Brand: Gator Pages: 8

Brand: benbat Pages: 14

Brand: SPL Pages: 5

SANICON TURBO 300

Brand: Thetford Pages: 25

Brand: A-Tach Mounts Pages: 2

Brand: Mopar Pages: 18

Brand: Subaru Pages: 44

Brand: ROADGEAR Pages: 2

Jumpy Miltispace

Brand: CITROËN Pages: 164

Brand: Directed Pages: 30

Brand: Rydeen Pages: 14

Brand: Webasto Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands