Mercury 1997 Mystique User Manual Download Page 56

Page: 56 / 279

Controls and Features

[CF08000(ALL)03/96]

Clock

[CF08200( Z)12/95]

7-1/2 pica art:0001296-A

The digital clock

[CF08300(ALL)12/95]

To set the hour, press and hold the hour button. When the
desired hour appears, release the button.

[CF08400(ALL)12/95]

To set the minutes, press and hold the minute button. When
the desired minute appears, release the button.

[CF08500(ALL)12/95]

To switch between a 12-hour clock and a 24-hour clock,
press both the hour and minute buttons at the same time.
Reset the time as above.

[CF08600(ALL)05/96]

Storage Compartments

[CF08700(ALL)12/95]

Your vehicle may have several storage compartments:

[CF08800(ALL)12/95]

■

a coin holder on the instrument panel

[CF08900( Z)12/95]

■

a stowage compartment on the lower left side of the
instrument panel

[CF09000(ALL)05/96]

The controls on the steering column and wheel are designed to
give you easy access to the controls while you are driving.

File:05cdcfz.ex

Update:Fri May 31 14:31:06 1996

Summary of Contents for 1997 Mystique
























































































































































































































































































Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands

Mercury 1997 Mystique, User Manual

Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands