Mercury 1997 Mystique User Manual Download Page 89

Page: 89 / 279

[SS02900(ALL)02/96]

Important Safety Belt Information

[SS03000(ALL)02/96]

The use of safety belts helps to restrain you and your
passengers in case of a collision. In most states and in Canada
the law requires their use.

[SS03100(ALL)02/96]

Safety belts provide best restraint when:

[SS03200(ALL)02/96]

■

the seatback is upright

[SS03300(ALL)02/96]

■

the occupant is sitting upright (not slouched)

[SS03400(ALL)02/96]

■

the lap belt is snug and low on the hips

[SS03500(ALL)02/96]

■

the shoulder belt is snug against the chest

[SS03600(ALL)02/96]

■

the knees are straight forward

[SS03700(ALL)02/96]

To help you remember to fasten your safety belt, a warning
light may come on and a chime may sound. See Safety Belt
Warning Light and Chime in the Instrumentation chapter.

File:06cdssz.ex

Update:Thu May 23 13:47:54 1996

Summary of Contents for 1997 Mystique
























































































































































































































































































Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands

Mercury 1997 Mystique, User Manual

Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands