Mercury 1997 Mystique User Manual Download Page 176

Page: 176 / 279

176

[MC03100(ALL)02/96

]

Opening the Hood

[MC03200(ALL)02/96

]

Inside the vehicle, pull the hood release handle located
under the bottom left corner of the instrument panel.

[MC03300(ALL)12/95]

10-1/2 pica

art:0000375-K

The hood release under the instrument panel

[MC03400(ALL)02/96

]

Go to the front of the vehicle and release the auxiliary latch
that is located under the hood at the center of the vehicle.

[MC03500(O )12/95]

10-1/2 pica

art:0001476-A

The auxiliary latch under the front edge of the hood

File:11cdmcz.ex

Update:Wed May 22 12:13:37 1996

Summary of Contents for 1997 Mystique
























































































































































































































































































Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands

Mercury 1997 Mystique, User Manual

Search results

Summary of Contents for 1997 Mystique

Reviews:

Related manuals for 1997 Mystique

Brands by name

Popular brands