Mercedes-Benz GLC 2019, Owner'S Manual

Page: 133 / 645

#
Turn the headlamp range adjuster to the
position that corresponds to the load condi‐
tion of your vehicle.
Operating the combination switch for the
lights
1 High beam
2 Turn signal indicator, right
3 Headlamp flasher
4 Turn signal indicator, left
#
Use the combination switch to activate the
desired function.
High beam
#
To switch on: turn the light switch to the
L or à position.
#
Press the combination switch in the direction
of arrow 1 .
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K .
#
To switch off: press the combination switch
in the direction of arrow 1 or pull in the
direction of arrow 3 .
Headlamp flasher
#
Pull the combination switch in the direction
of arrow 3 .
Turn signal indicators
#
To indicate briefly: press the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal indicator will
flash three times.
#
To indicate permanently: press the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4 .
Vehicles with Active Lane Change Assist:
R
Indicator operation activated by the driver
can extend for the duration of the lane
change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
130 Light and sight