Mercedes-Benz GLC 2019, Owner'S Manual

Page: 67 / 645

i‑Size child seat securing system
(
/
page 62)
O Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat forward slightly.
When fitting an ISOFIX child restraint sys‐
tem, observe the following:
O When you are using a Group 0/0+ baby
car seat and a Group 1 rearward-facing
child restraint system on a rear seat:
adjust the front seat so that the seat does
not touch the child restraint system.
O
When you are using a Group 1 forward-
facing child restraint system: remove the
head restraint from the respective seat, if
possible. In addition, the seat backrest of
the child restraint system must, as far as
possible, lie flat against the backrest of the
vehicle seat.
After the child restraint system has been
removed, replace the head restraints again
immediately and adjust them correctly.
O For certain child restraint systems in weight
group 2 or 3, there may be limitations for
the maximum size setting, e.g. due to possi‐
ble contact with the roof.
O
The child restraint system must not be ten‐
sioned between the roof and the seat cush‐
ion and/or be fitted facing the wrong direc‐
tion. Where possible, adjust the seat cush‐
ion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraints. Adjust
the head restraints accordingly.
When fitting an i‑Size child restraint sys‐
tem, observe the following:
O When you are using a rearward-facing
child restraint system: adjust the front
seat so that it does not touch the child
restraint system.
O When you are using a forward-facing
child restraint system: remove the head
restraint from the respective seat, if possi‐
ble. In addition, the seat backrest of the
child restraint system must, as far as possi‐
ble, lie flat against the backrest of the vehi‐
cle seat.
After the child restraint system has been
removed, replace the head restraints again
immediately and adjust them correctly.
64 Occupant safety