Mercedes-Benz GLC 2019, Owner'S Manual

Page: 142 / 645

Changing the front bulbs (vehicles with halo‐
gen headlamps)
Fitting/removing the cover on the front
wheel arch
Requirements:
R
The lighting system is switched off.
R
The appropriate front wheel is turned
inwards.
#
To remove: turn cover 1 to the left and
remove it from the wheel arch liner.
#
To install: insert cover 1 into the wheel
arch liner and turn it to the right until it
engages.
Replacing bulbs in the halogen headlamp
Requirements:
R
Dipped beam: a H7 55 W light bulb is availa‐
ble.
R
Highbeam: a H7 55 W light bulb is available.
1 Dipped beam housing cover
2
Main beam housing cover
#
Switch the lighting system off.
#
Remove the cover in the front wheel arch
(
/
page 139).
#
Turn the relevant housing cover anti-clock‐
wise and remove it.
#
Turn the socket anti-clockwise and remove it.
#
Pull the bulb out of the socket.
#
Insert the new bulb into the socket such that
the entire base of the bulb is resting on the
bottom of the socket.
#
Insert the socket and turn it clockwise.
#
Press on the housing cover and turn it clock‐
wise.
#
Replace the cover in the front wheel arch
(
/
page 139).
Changing the rear bulbs (vehicles with halo‐
gen headlamps)
Replacing the tail lamp bulbs
#
Due to their locations, have the bulbs for the
turn signal light and reversing light changed
at a qualified specialist workshop.
Light and sight 139