Display messages
Possible causes/consequences and
M
M
Solutions
Depress clutch fully to
start engine
* You have attempted to start the engine without depressing the clutch pedal.
#
Depress the clutch pedal and then start the engine.
The engine has stalled while the vehicle was pulling away, e.g. because the clutch pedal was released too quickly.
#
Depress the clutch pedal again.
The engine will start automatically.
#
Slowly release the clutch pedal to pull away.
Clutch overheated Avoid
pulling away for XX:XX mins
* The clutch is under considerable load and is overheating.
Avoid frequent pulling away and driving at walking pace over longer distances.
#
Stop the vehicle, paying attention to road and traffic conditions, and leave the engine running.
The clutch will cool more quickly when the engine is running.
or
#
If possible, continue driving at a steady speed and remove your foot from the clutch pedal. Do not ride the
clutch.
The clutch will cool while the vehicle is in motion.
When the clutch has cooled down, the display message will disappear.
564 Display messages and warning/indicator lamps
Summary of Contents for GLC 2019
