Replacing the windscreen wiper blades
&
WARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
#
Always switch off the windscreen wipers
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
#
Switch the vehicle on and then off again
immediately.
#
Within around 15 seconds, press the
î
button on the combination switch for approx-
imately three seconds (
/
page 236).
The wiper arms will move into the replacement
position.
Removing the wiper blades
#
Fold the wiper arms away from the wind-
screen.
#
Hold the wiper arm with one hand. With the
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
1
as
far as it will go.
#
Press release knob
2
.
#
Remove the wiper blade from the wiper arm in
the direction of arrow
3
.
Fitting the wiper blades
#
Push the new wiper blade into the wiper arm
in the direction of arrow
1
until release knob
2
engages.
#
Make sure that the wiper blade is seated cor-
rectly.
46
Electronic information products
ohne
Summary of Contents for EQS 2021
