#
Always switch off the windscreen wipers
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
#
Switch the vehicle on and then off again
immediately.
#
Within around 15 seconds, press the
î
button on the combination switch for approx-
imately three seconds (
/
page 236).
The wiper arms will move into the replacement
position.
Removing the wiper blades
#
Fold the wiper arms away from the wind-
screen.
#
Hold the wiper arm with one hand. With the
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
1
as
far as it will go.
#
Press release knob
2
.
#
Remove the wiper blade from the wiper arm in
the direction of arrow
3
.
Fitting the wiper blades
#
Push the new wiper blade into the wiper arm
in the direction of arrow
1
until release knob
2
engages.
#
Make sure that the wiper blade is seated cor-
rectly.
#
Fold the wiper arms back onto the wind-
screen.
Light and sight 237
ohne
Summary of Contents for EQS 2021
