Combo 1 vehicle socket
Combo 2 vehicle socket
1
Type 1 or type 2 connection for charging with
alternating current
2
Socket extension for charging with direct cur-
rent
%
When using a CCS (Combined Charging Sys-
tem) charging cable to charge with direct cur-
rent at a combo vehicle socket, both vehicle
socket connections
1
and
2
are used for
charging.
Charging options for the high-voltage battery
(mode 2, 3 or 4):
R
Charging through recuperation while the vehi-
cle is in motion
R
Charging with alternating current when sta-
tionary:
-
at a mains socket (mode 2)
-
at a wallbox or charging station (mode 3)
R
Charging with direct current when stationary:
-
at a fast charging station (mode 4)
Depending on the country-specific vehicle equip-
ment and your vehicle's charging cable, single
phase AC charging is also possible.
Observe the different grid requirements of your
current location when charging. Only use charging
cables which conform to the grid requirements.
Consult a qualified electrician or your local grid
operator if you have any questions.
It is recommended that you charge the high-volt-
age battery at a wallbox or charging station due to
286 Driving and parking
ohne
Summary of Contents for EQS 2021
