#
To close the convenience doors from outside:
touch recessed sensor surface
1
on the door
handle.
Object detection
Object detection uses several sensors to monitor
the opening range of the convenience doors in
order to detect objects. If one of the sensors
detects an object, the convenience doors are
stopped and a warning is displayed in the multi-
media system.
#
Manually open a door stopped in an intermedi-
ate position.
Even if the convenience doors are equipped with
sensors, it cannot be guaranteed that all objects
are detected. Object detection is only an aid and
is not a substitute for the attention of the vehicle
occupants to their immediate surroundings when
opening and closing the convenience doors. The
vehicle occupants are always responsible for
opening and closing the doors safely.
Detection range of the sensors
1
approximately 1 m
*
NOTE Risk of an accident from objects at
close range
Object recognition may not detect certain
objects at close range.
#
When opening the convenience doors,
pay particular attention to low objects
and obstacles in the side window area.
Object detection does not always detect
such objects at close range, especially
during movement. The vehicle or other
objects could otherwise be damaged.
Opening and closing 147
ohne
Summary of Contents for EQS 2021
