Mercedes-Benz EQS 2021, Operator'S Manual

Page: 653 / 928

%
The transmission may be locked in position
j
in the event of damage to the electrics. To
shift to
i
, provide the on-board electrical
system with power (
/
page 50).
* NOTE Possible damage to the vehicle
when loading or unloading
When loading or unloading, the vehicle must
be raised to transport level.
If the transport settings are not shown or the
Vehicle not ready for loading message is dis-
played, the vehicle may not be loaded or
unloaded.
#
If required, raise the vehicle to transport
level again.
#
A vehicle that cannot be raised to trans-
port level may not be loaded or unloaded
using a ramp. Consult a qualified special-
ist workshop.
&
WARNING Risk of accident due to activa-
ted transport level
If the vehicle is raised to transport level, driv-
ing and driving safety systems have only limi-
ted availability and the view from the vehicle is
restricted.
Driving safety is severely restricted and there
is a risk of an accident!
#
Do not use transport level in normal road
operation.
#
Only activate and use transport level to
load the vehicle and when not on public
roads.
#
Ensure that no persons or obstacles are
located in the area surrounding the vehi-
cle.
Raising the vehicle to transport level
#
Press the G button for at least five sec-
onds.
#
Immediately press and hold the
a
button
for at least one second.
The For transport level, switch vehicle on
message is displayed.
#
Switch on the vehicle (
/
page 264).
The transport settings are displayed.
#
Swipe downward to select Transport level and
press
a
.
The vehicle is raised and the Vehicle rising…
Do not drive on ramp message is displayed
for 5 seconds. The raising process can last up
to 60 seconds and can be cancelled with the
G button.
#
When raising, do not switch off the vehicle.
While the vehicle is being raised, you can
manoeuvre at a maximum speed of 40 km/h.
Breakdown assistance 651
ohne