Lowering the vehicle after unloading
#
Switch on the power supply.
#
Switch on the vehicle.
#
Swipe upward in the transport settings to
select
Standard level
and press
a
.
The vehicle is adjusted to the height of the last
active level and the
Lowering vehicle
message
is displayed.
#
After the vehicle has been lowered, press the
G
button for at least two seconds.
The transport settings are closed.
Towing eye storage location
Towing eye
1
is located under the boot floor.
Fitting and removing the towing eye
#
Press cover
1
at top
2
inwards and
remove.
#
Screw in the towing eye clockwise as far as it
will go and tighten.
Vehicles with a trailer hitch: vehicles with a trailer
hitch do not have a rear bracket for the towing
eye. Fasten the tow bar to the trailer hitch.
#
Make sure that cover
1
engages in the
bumper when you remove the towing eye.
Breakdown assistance 653
ohne
Summary of Contents for EQS 2021
