MTV1000 Ventilator System
9
User’s Manual
2.3.
Cautions on Electrical Safety
The following are cautions on electrical safety. Please read carefully before using the
product.
WARNING
1.
The rated power input for this product is AC 100~220V / 50–60Hz.
2.
Connect the power plug to an AC power outlet with an earth terminal.
3.
Note that neither the company nor any representative of the company will be
responsible for any issues arising from the use of any power source out of the rated
power input.
4.
Only authorized personnel who are trained to service the product may disassemble
the product. Note that neither the company nor any representative of the company
will be responsible for any electric shock, short circuit or product damage caused by
unauthorized disassembly. Failure to comply will cancel the product warranty and
make the product ineligible for service.
5.
If the power cord or sensor cable is damaged, immediately stop using the product
and replace the power cord or cable. Using the product when the power cord or
sensor cable is damaged may cause an electric shock, short circuit, current leakage
or product damage.
6.
Do not bump or move the product while the power cord or sensor cable is connected
to it. This may cause patient injuries or product malfunctions.
7.
When using the product with other devices, use a separate AC power source for the
other devices to ensure the patient’s safety.
8.
Do not use an anti-electrostatic or conductive tube for the product.
9.
Auxiliary equipment and accessories provided by MEKICS are qualified items that
meet electrical safety standards. The use of other companies’ products or unproven
items may cause injury to the patient or product damage.
CAUTION
Only use auxiliary equipment provided by the MEKICS Head Office or MEKICS’
designated representatives.
ATTENTION
1.
This product uses 10.8V, 4400mAh (2ea), Li-ion battery.
2.
When charging battery, connect the AC cable. Take care to prevent metal substances
from contacting the battery charging terminal.
