MTV1000 Ventilator System
8
User’s Manual
2.2.
Cautions when using the product
The following are cautions when using the product. Please read them thoroughly before
use.
WARNING
1.
It is extremely dangerous to use or store the product in a place exposed to chemicals
or explosive gases.
2.
Do not disjoint or disassemble the product, doing so will cancel the product warranty.
3.
Do not connect the product to a power supply before completing the installation. This
may damage the product.
4.
Before using the product, ensure that the settings of all the sensors and functions are
correct. Only authorized, well-informed personnel should use the Ventilator unit.
5.
The proper functionality of the product should be verified regularly.
6.
Do not use the product on more than one patient at a time.
7.
Do not use the product in a place exposed to high humidity.
8.
It is very dangerous to operate the product with wet hands.
9.
Do not use the product in a place exposed to direct sunlight.
10.
Do not use the product in a place with extreme temperature variations.
The proper temperature ranges from 10
C to 40
C.
11.
Do not use the product near a heating device.
12.
Do not use the product in a very humid place or a place with poor ventilation.
13.
The proper humidity ranges from 0% to 95%.
14.
Do not use the product in a place where the product could be exposed to extreme
impact or vibration.
15.
Be careful to prevent dirt, especially metal materials, from getting inside the product.
CAUTION
1.
This product is used to determine patient status. Other clinical information must be
used together for accurate diagnosis.
2.
Take care not to cause pain on patients from tightening sensors. Also, take care not
to tangle patients with sensor cables.
3.
If measurement values displayed on the screen are considered inaccurate, measure
another patient for comparison.
4.
Do not use one product on two patients simultaneously.
