ME-Messysteme GSV-2AS, User Manual

Page: 19 / 66

Command
No.
Command
No.
(Hexadecimal)
Command name Number of
parameters
Number of data
bytes send by the
GSV
51 33 get range 0 1
52 34 reserved
53 35 get offset wait 0 1
54 36 get options 0 3
55 37 reserved
56 38 reserved
57 39 reserved
58 3A reserved
59 3B get value 0 5 4
60 3C clear maximum value 0 0
61 3D set Digits 1 0
62 3E get Digits 0 1
63 3F reserved
64 40 reserved
65 41 Get Channel 0 1
66 42 Get Last Error 0 1
67 43 Set Second Threshold 4 0
68 44 Get Second Threshold 0 4
69 45 Get Device Type 0 1
70 46 calc norm 0 0
128 80 Set TX mode 1 0
129 81 Get TXmode 0 1
130 82 Set Baud 5 1 0
131 83 Get Baud 0 1
132 84 reserved
133 85 reserved
134 86
Set Slow Rate 2
0
135 87 Get Slow Rate 0 2
136 88 Set Special Mode 2 0
137 89 Get Special Mode 0 2
138 8A Write Sampling Rate 3 0
139 8B Read Sampling Rate 0 3
140 8C Set CAN setting 3 0
141 8D Get CAN setting 1 2
142 8E reserved
143 8F reserved
144 90 Set Analogue Filter 2 0
145 91 Get Analogue Filter 0 2
146 92 Switch Blocking 3 0
147 93 Get Command Available 2 1
148 94 Set Noise-Cut Threshold 6 3 0
149 95 Get Noise-Cut Threshold
6
0 3
150 96 Set Auto-Zero Counter
6
2 0
151 97 Get Auto-Zero Counter 1 0 2
152 98 Set User-Text Char 1) 2 0
153 99 reserved
154 9A Set User Offset Value
3
3 0
155 9B Get User Offset Value³ 0 3
156 9C
reserved
4
At a normal version with binary output
5 This command can only be executed with the configuration jumper set, see p.62
6 If function exists (see command description)
1 If funktion existent (s. command description)
3 Existent from firmware-version 1.3 on
ME-Meßsysteme GmbH, Neuendorfstr. 18a, D-16761 Hennigsdorf Germany
Phone 03302 78620 60, Fax 03302 78620 69, info@me-systeme.de , www.me-systeme.de/en
19