Usage of the keyboard and the menu
Menu entry level
1
Menu entry level 2
Menu entry level 3
Sensor config.
➔
unit
➔
Sensor capacity
➔
Rated output
Select the unit
1
Setting the physical nominal value of the
sensor.
2
Setting the electrical rated output of the sensor.²
Strain analysis
➔
Set gage factor
➔
Set bridge type
➔
Setting the gage factor between 0,2 and 258
3
➔
Full bridge: Full bridge circuit with 4 single
strain gauges, all in longitudinal direction.³
➔
Half bridge: Half bridge circuit with 2 single
strain gauges, both in longitudinal direction.³
➔
Quarter bridge: Quarter bridge circuit with
one single starin gauge.³
➔
PR.full bridge: Full bridge circuit with 4 single
strain gauges, 2 in longitudinal and 2 in lateral
direction.³
➔
PR.half bridge: Half bridge circuit with 2
single strain gauges, 1 in longitudinal and 1 in
lateral direction ³
Menu entry level 4
Set Poissons ratio (only if PRfull or PR.half
bridge was selected in level 3). Number value
from 0 to 0,5.³
Load settings
➔
Default: Factory
settings, i.e. restoring
the GSV-2 parameters
of the initial delivery
state.
➔
User 1: User
configurable parameter
record No.1, i.e. loading
values that were
previously saved in
“User 1” with Save
settings.
➔
...and so on, to
➔
User 6 like 1, but
record No 6
Save settings
Storing the actual
parameter configuration in
User 1 to User 6
1 Changing the unit doesn't change the measuring value's scaling!
2 Changing the sensor capacity or the rated output changes the measuring value's scaling.
3 Changing the starin gauge parameters of the strain analysis changes the measuring value's scaling and
the unit.
ME-Meßsysteme GmbH, Neuendorfstr. 18a, D-16761 Hennigsdorf Germany
Phone 03302 78620 60, Fax 03302 78620 69,
,
www.me-systeme.de/en
13
Summary of Contents for GSV-2AS
Page 65: ......
