McDonald's C836 Manual Download Page 8

Page: 8 / 68

150209

C838 Exploded View (See Figure 2.)

ITEM

TAYLOR

PART NO.

DESCRIPTION

QTY.

FUNCTION

WARR.
CLASS

073345-L

Panel-Side Left

Provides access to internal com-
ponents for service and cleaning.

103

039381

Screw-10-32 X 3/8

Secures the panel to the frame.

000

073352

Panel-Side Upper Left

Provides access to internal com-
ponents for service and cleaning.

103

X78330-SER

Kit A.-Grease Shield

Prevents grease migration.

103

078329

Fastener-Snap

Fastens grease shields to rear
shroud of grill.

000

4b 078285

Shield-Grease

Prevents grease migration.

000

X83556

Panel A.-Back Panel
(Upper)

Provides access to internal com-
ponents for service and cleaning.

103

073353

Panel-Side Upper
Right

Provides access to internal com-
ponents for service and cleaning.

103

073345-R

Panel-Side Right
(Lower)

Provides access to internal com-
ponents for service and cleaning.

103

024298

Screw-5/16-18 x 2-1/2

Secures the panel to the frame.

000

073594

Nut-Jam 1 1/2-12 Steel

Secures the caster to the base
pan.

000

078377

Caster- 5” 7-5/8 Swivel

Allows grill mobility.

103

073240

Caster-5” 7-5/8 Swivel
w/Lock

Prevents grill movement.

103

X72491-SER

Control-Display

Controls all functions of the grill.

103

076989-WP

Switch-Rocker-DPST
10A (Fan Interlock)

Activates power to the grill and the
exhaust fans.

103

075288

Guard-Lense

Protects the Standby button from
being accidentally activated.

103

076012

Button-Operator-Black
(Standby)

Activates the cook cycle, keeps
the upper platen in the closed po-
sition, and displays the message
“STANDBY” on the control. When
pressed twice within five seconds,
the upper platen will automatically
lower into the Standby position.

000

076011

Button-Operator-Red
(Raise)

Cancels the Standby mode, raises
the upper platen, and deactivates
the Cook cycle.

000

072472

Handle-Platen

The handle sits solidly on the
lower cook surface when the
platen is lowered.

103

Summary of Contents for C836





































































Search results

Summary of Contents for C836

Reviews:

Related manuals for C836

Brands by name

Popular brands

McDonald's C836, Manual

Search results

Summary of Contents for C836

Reviews:

Related manuals for C836

Brands by name

Popular brands