McDonald's C836 Manual Download Page 23

Page: 23 / 68

To Cook in the Flat Grill Mode

To select a flat grill menu item, press the

key.

Press the

key for the Manual Mode.

The display may show “TOO COOL” or
“TOO HOT”, until the grill reaches the set
temperatures.

Use the

keys to scroll to the

flat grill menu item.

After placing product in the prescribed
method, press the STANDBY button to
start the cook cycle. (See Figure 29.)

Figure 29

Perform the functions that appear on the
display (i.e., sear, turn). Pressing the
RAISE button will cancel the cook cycle.

When the cook cycle is complete, the
display will flash the message “REMOVE”
and an audible alert will sound. Remove
the product per the prescribed method.

To Transition From Breakfast to Lunch

If the grill is in the AM AUTO Mode, press

the

key to select PM.

If the grill is set to a certain breakfast item

in the Manual Mode, press the

key

to select PM.

The display may show “TOO COOL” or
“TOO HOT”, until the grill reaches the set
temperatures.

To Display the Current Temperatures

Note:

The actual temperatures may be

displayed at any time, including during a cook
cycle.

Press the

key. A series of screens

will display. The first screen will display as
follows.

Top Bck

(AM/PM)

Top Frt

Back

Cntr

Frt

The next display will show the actual
temperatures, per the following example.

426

Now/Deg F

425

348

350

349

Note:

Pressing the

key once and the

key five times will keep the temperatures

on the screen until the

key is pressed.

Summary of Contents for C836





































































Search results

Summary of Contents for C836

Reviews:

Related manuals for C836

Brands by name

Popular brands

McDonald's C836, Manual

Search results

Summary of Contents for C836

Reviews:

Related manuals for C836

Brands by name

Popular brands