McDonald's C836, Manual

Page: 14 / 68

12
EQUIPMENT SET-UP PROCEDURES
Installing Upper Platen Release Sheet
1. Slide the release material retention bar
through the loop in the release sheet.
(See Figure 6.)
Figure 6
2. Engage the material retention bar into the
hooks provided on the platen.
(See Figure 7.)
Figure 7
3. Center the release sheet on the bar. Pull
it tightly over the release material bar
located in the front of the platen. Secure
the sheet with two locking clips.
(See Figure 8.)
Figure 8
4. Carefully wrap the release sheet side
flaps over the cover rails and secure the
sheet with locking clips. (See Figure 9.)
Figure 9
IMPORTANT! Do not crease the release
sheet. This will greatly reduce the life
of the sheet.
5. Make sure the release sheet is tight
across the upper platen surface.