McDonald's C836 Manual Download Page 12 | Manualshive

Page: 12 / 68

background image

10

IMPORTANT TO THE OPERATOR

Important to the Operator Exploded View (See Figure 5.)

ITEM

DESCRIPTION

FUNCTION

1

Fan Interlock Switch

This switch activates power to the grill and the exhaust fans.

2

ON/OFF Key

This key is used to turn the controller on and off to start a
preheating mode and to auto-gap the platen. The key must be
pressed and held for three seconds to activate, in order to
prevent unintended operation.

3

AM/PM Key

This key is used to toggle back and forth between the AM and PM
menu item lists.

4

MANUAL/AUTO Key

This key is used to toggle back and forth between the Manual
and Auto modes.

5

Left Arrow Key

This key is used to scroll through menu items when cooking in the
Manual mode. (Inactive in the Auto mode.)

6

Down Arrow Key

While in the Menu mode, this key is used to decrease a numerical
value and to scroll through the characters when entering a new
menu item or modifying an old one. (Inactive in the Auto mode.)

7

OK Key

This key is used to accept the information entered.

8

Right Arrow Key

This key is used to scroll through menu items when cooking in the
Manual mode. (Inactive in the Auto mode.)

9

Up Arrow Key

While in the Menu mode, this key is used to increase a numerical
value and to scroll through the characters when entering a new
menu item or modifying an old one. (Inactive in the Auto mode.)

10

Program Key

This key is used to enter and exit the Programming mode.

11

Temperature Key

When pressed and held for 3 seconds, this key will access the
Probe Calibration screen.

12

Cook Time Key

This key is used to change the remove time of a specific menu
item. To change a specific cook time, the item must be selected in
the Manual mode. (

Note:

Press and hold the Cook Time key for

three seconds to activate.)

13

Liquid Crystal Display

This screen displays menu options and information.

«
...
10
11
12
13
14
...
»

Summary of Contents for C836





































































Reviews:

No comments

Related manuals for C836

Brand: MacDon Pages: 17

Brand: Olympus Pages: 50

Brand: VAHVA Pages: 19

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: jcb Pages: 41

Brand: Halyard Pages: 88

Brand: HALDER Pages: 2

Brand: Hällde Pages: 40

Brand: Hällde Pages: 6

Brand: TC Electronic Pages: 6

Brand: Te Pari Pages: 6

Brand: KCI Pages: 2

Brand: KCI Pages: 60

Brand: Landoll Pages: 38

Brand: FARM-MAXX Pages: 35

Brand: Daavlin Pages: 55

Brand: Daavlin Pages: 19

Brand: Xils lab Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands