Mazda 2007 MX-5 Miata Manual Download Page 49 | Manualshive

Page: 49 / 406

background image

Black plate (49,1)

How the Air Bags Work

q

How the Front Air Bags Work

When air bag crash sensors detect a frontal impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the front air bags and after the inflation, the front air bags
quickly deflate.
The front air bags will function only once. After that,

the front air bags will not work

again and must be replaced.

Only an Authorized Mazda Dealer can replace the system components.

The front, dual stage air bags control air bag inflation in two energy stages. During an
impact of moderate severity the front air bags deploy with lesser energy, whereas during
more severe impacts, they deploy with more energy. Deployment of the front air bags may
differ between the driver and the front passenger depending on the driver seat position,
front passenger weight and front seat belt usage, all of which provide data from each sensor
to the air bag system.

The front air bags will deploy only
in a frontal or frontal offset impact.

Driver seat slide position sensor

Your vehicle is equipped with a driver seat slide position sensor as a part of the
supplemental restraint system. The sensor is located under the driver seat. The sensor
determines whether the driver seat is fore or aft of a reference position and sends the seat
position to the diagnostic module (SAS unit). The sensor is also designed to control the
deployment of the driver air bag depending on how close the driver seat is to the steering
wheel.

The air bag/seat belt pretensioner system warning light flashes if the sensor has a possible
malfunction (page 2-45).

Essential Safety Equipment

SRS Air Bags

2-37

MX-5_8V80-EA-06F_Edition3 Page49
Tuesday, August 29 2006 10:22 AM

Form No.8V80-EA-06F

«
...
47
48
49
50
51
...
»

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 MX-5 Miata

Brand: LaserTrack Pages: 12

Brand: AA Products Pages: 6

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 2

Brand: Yakima Pages: 12

iBoard IB-ZK406

Brand: APS Auto Parts Specialist Pages: 3

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

Brand: Cadillac Pages: 522

1995 Cutlass Supreme

Brand: Oldsmobile Pages: 340

Brand: Kleinn Pages: 8

Brand: Phonocar Pages: 28

Brand: Volvo Pages: 16

Brand: Rosco Pages: 12

Brand: Van Guard Pages: 3

Brand: HAKR Pages: 2

Brand: Honda Pages: 280

Brand: SMART Pages: 26

Brand: SAF-HOLLAND Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands