Mazda 2007 MX-5 Miata Manual Download Page 126

Page: 126 / 406

Black plate (126,1)

4. Close the deck uniformly on both sides

using two adults, one on each side of
the vehicle.

CAUTION

Close the deck using two adults. Doing
it alone could result in injury or the
deck lid mechanism being twisted
which could damage it.

5. Lightly pushing the deck downward,

pull the ropes to the rear along both
sides of the trunk to hold the deck
down.

NOTE

Pull the ropes horizontally to the
vehicle rear.

Rope

6. Lightly move the deck and verify that

it is secured completely.

7. Open the trunk using the key, and tie

the rope to the bracket and knot it twice
so that it does not loosen.

Rope

Bracket

CAUTION

Tie the ropes securely so that the deck
does not open while the vehicle is being
driven.

3-68

Knowing Your Mazda

Doors and Locks

MX-5_8V80-EA-06F_Edition3 Page126
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands