Mazda 2007 MX-5 Miata Manual Download Page 117

Page: 117 / 406

Black plate (117,1)

NOTE

When the operation is finished, a beep
sound is heard and the operation
indicator light turns off.

Closing the Power Retractable
Hardtop

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transmission in Park (P), a manual
transmission in Neutral.

3. Apply the parking brake with the brake

pedal depressed.

4. Start the Engine.

NOTE

Do not open/close the hardtop with the
engine stopped. Otherwise the vehicle's
battery power could be depleted.

5. Press and hold the close button until

the hardtop closes completely.

NOTE

When the close switch is pressed, a
beep sound is heard.

The hardtop keeps closing and the
operation indicator light flashes
while the close switch is pressed.

If the switch is released while the
hardtop is closing, the hardtop stops
closing. If the switch is pressed
again, the hardtop resumes closing.

6. The deck opens.

NOTE

If the windows are closed, the windows
automatically open partially when the
deck opens.

Knowing Your Mazda

Doors and Locks

3-59

MX-5_8V80-EA-06F_Edition3 Page117
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands