Mazda 2007 MX-5 Miata Manual Download Page 322 | Manualshive

Page: 322 / 406

background image

Black plate (322,1)

NOTE

l

Always check tire pressure when
tires are cold.

l

Warm tires normally exceed
recommended pressures. Don't
release air from warm tires to adjust
the pressure.

l

Underinflation can cause reduced
fuel economy, uneven and
accelerated tire wear, and poor
sealing of the tire bead, which will
deform the wheel and cause
separation of tire from rim.

l

Overinflation can produce a harsh
ride, uneven and accelerated tire
wear, and a greater possibility of
damage from road hazards.
Keep your tire pressure at the correct
levels. If one frequently needs
inflating, have it inspected.

q

Tire Rotation

To equalize tread wear, rotate the tires if
irregular wear develops. According to the
scheduled maintenance charts.Refer to
Scheduled Maintenance on page 8-3.
During rotation, inspect them for correct
balance.

NOTE

Because your vehicle is not equipped
with a spare tire, you cannot do a tire
rotation safely with the jack that comes
with your vehicle. Have an Authorized
Mazda Dealer perform tire rotation.

Forward

Also, inspect them for uneven wear and
damage. Abnormal wear is usually caused
by one or a combination of the following:

l

Incorrect tire pressure

l

Improper wheel alignment

l

Out-of-balance wheel

l

Severe braking

After rotation, inflate all tire pressures to
specification (page 10-6) and inspect the
lug nuts for tightness.

CAUTION

Rotate unidirectional tires and radial
tires that have an asymmetrical tread
pattern or studs only from front to rear,
not from side to side. Tire performance
will be weakened if rotated from side to
side.

8-34

Maintenance and Care

Owner Maintenance

MX-5_8V80-EA-06F_Edition3 Page322
Tuesday, August 29 2006 10:25 AM

Form No.8V80-EA-06F

«
...
320
321
322
323
324
...
»

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 MX-5 Miata

Brand: Ranger design Pages: 6

Brand: B-Speech Pages: 24

Brand: PEUGEOT Pages: 249

Brand: Gator Pages: 2

VIEWLINE 52 MM - MOUNTING 11-09

Brand: VDO Pages: 4

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Brand: Flash Cover Pages: 2

BASIC TLL171231

Brand: Tellur Pages: 5

Brand: Calix group Pages: 4

Brand: Huf Pages: 6

Brand: true-i Pages: 11

Brand: Lexus Pages: 830

Brand: Volvo Pages: 18

Brand: Metra Electronics Pages: 8

Brand: Pyle Pages: 14

Brand: PAC Pages: 18

Giulia 952 2017

Brand: Alfa Romeo Pages: 324

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands