Mazda 2007 MX-5 Miata Manual Download Page 145

Page: 145 / 406

Black plate (145,1)

Before Getting In

Be sure the windows, outside mirrors,
and outside lights are clean.

Inspect inflation pressures and
condition of tires.

Look under the vehicle for any sign of
fluid leaks.

If you plan to back up, make sure
nothing is in your way.

NOTE

Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. See
Maintenance, Section 8.

After Getting In

Are all doors closed and locked?

Is the seat adjusted properly?

Are the inside and outside mirrors
adjusted?

Is each occupant's seat belt fastened?

Check all gauges.

Check all warning lights when the
ignition switch is turned to the ON
position.

Release the parking brake and make
sure the brake warning light goes off.

Always be thoroughly familiar with your
Mazda.

Before Driving Your Mazda

Before Starting the Engine

4-5

MX-5_8V80-EA-06F_Edition3 Page145
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands