manualshive.com logo in svg

Mazda 2007 MX-5 Miata, Manual, Page: 177 / 406

Share
Download
Mazda 2007 MX-5 Miata Manual Download Page 177

Black plate (177,1)

CAUTION

l

The DSC may not operate correctly
unless the following are observed:

l

Use tires of the correct size
specified for your Mazda on all
four wheels.

l

Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.

l

Do not mix worn tires.

l

The DSC may not operate correctly
when tire chains are used or a
temporary spare tire is installed
because the tire diameter changes.

l

If repair or replacement of the
steering or other surrounding
equipment is necessary, have it done
at an Authorized Mazda Dealer. If
the center position of the steering
deviates, the DSC may not operate
correctly because there is a sensor in
the steering which detects driving
conditions.

q

TCS/DSC Indicator Light

This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.

If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.

q

DSC OFF Indicator Light

This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also comes on when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-26).

If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.

Driving Your Mazda

Starting and Driving

5-25

MX-5_8V80-EA-06F_Edition3 Page177
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Reviews:

No comments