Mazda 2007 MX-5 Miata Manual Download Page 296

Page: 296 / 406

Black plate (296,1)

Scheduled Maintenance (Mexico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
If any do apply, follow Schedule 2.

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are being used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Driving in extremely hot conditions

Driving in mountainous conditions continually

NOTE

After the prescribed period, continue to follow the described maintenance at the
recommended intervals.

8-8

Maintenance and Care

Scheduled Maintenance

MX-5_8V80-EA-06F_Edition3 Page296
Tuesday, August 29 2006 10:25 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands