Mazda 2007 MX-5 Miata, Manual

Page: 72 / 406

Black plate (72,1)
NOTE
l
When turning the ignition switch to
the LOCK position, the ignition
switch has to be pushed in from the
ACC position and turned. Without
being pushed in, the ignition switch
stops at the ACC position and the
vehicle battery may be discharged if
the ignition switch is left in the ACC
position. When leaving the vehicle,
make sure the ignition switch is
turned to the LOCK position.
l
If the vehicle is left with the ignition
switch not in the LOCK position, a
beep sound is heard and the indicator
light flashes to notify the driver.
Refer to Warning Beep (page 3-18).
Operation Using Advanced
Key Functions
q
Keyless Entry System
This system uses the more traditional key
buttons to remotely lock and unlock the
doors and opens the trunk lid, and opens
the power windows.
It can also help you signal for attention.
Press the buttons slowly and carefully.
NOTE
l
The keyless entry system is designed
to operate up to about 2.5 m (8 ft)
from the center of the vehicle, but
this may vary due to local
conditions.
l
The system does not operate when
the ignition switch is not in the
LOCK position or the start knob is
pushed in.
l
With the start knob installed in the
LOCK position, the system is fully
operational. If the ignition switch is
not in the LOCK position or the start
knob is pushed in, the system does
not operate.
l
Both doors cannot be locked by
pressing the lock button while either
door is open. The hazard warning
lights will also not flash.
l
(With power retractable hardtop)
The trunk lid cannot be operated
remotely if the power retractable
hardtop is not fully opened or fully
closed.
3-14
Knowing Your Mazda
Advanced Keyless Entry and Start System
MX-5_8V80-EA-06F_Edition3 Page72
Tuesday, August 29 2006 10:22 AM
Form No.8V80-EA-06F