Mazda 2007 MX-5 Miata Manual Download Page 118

Page: 118 / 406

Black plate (118,1)

7. The hardtop comes out from under the

deck.

8. The hardtop closes.

9. The deck closes.

NOTE

When the operation is finished, a
beep sound is heard and the
operation indicator light illuminates.

The power windows cannot be
closed automatically.

10. Move the top latch slowly to make

sure the anchor engages with the
striker, then rotate the top latch to the
lock position until a click sound is
heard.

Striker

Anchor

3-60

Knowing Your Mazda

Doors and Locks

MX-5_8V80-EA-06F_Edition3 Page118
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands