Mazda 2007 MX-5 Miata Manual Download Page 260

Page: 260 / 406

Black plate (260,1)

Parking in an Emergency

The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.

The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.

Depress the hazard warning flasher and all
the turn signals will flash.

NOTE

The turn signals don't work when the
hazard warning lights are on.

Check local regulations about the use
of hazard warning lights while the
vehicle is being towed. They may
forbid it.

7-2

In Case of an Emergency

Parking in an Emergency

MX-5_8V80-EA-06F_Edition3 Page260
Tuesday, August 29 2006 10:24 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands