Mazda 2007 MX-5 Miata Manual Download Page 250

Page: 250 / 406

Black plate (250,1)

Audio Control Switch
Operation (Steering Wheel)

When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.

NOTE

Because the audio unit will be turned
off under the following conditions, the
switches will be inoperable.

When the ignition switch is turned to
the LOCK position.

When the power button on the audio
unit is pressed and the audio unit is
turned off.

When all CDs are ejected.

Adjusting the Volume

To increase the volume, pull up the
volume switch.

To decrease the volume, press down the
volume switch.

Changing the Source

Press the mode switch (

) to change

the audio source (FM1 radio> FM2 radio>
AM radio> CD player or CD changer>
SIRIUS1> SIRIUS2> SIRIUS3>
cyclical).

6-40

Interior Comfort

Some models.

Audio System

MX-5_8V80-EA-06F_Edition3 Page250
Tuesday, August 29 2006 10:24 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands