Mazda 2007 MX-5 Miata Manual Download Page 123 | Manualshive

Page: 123 / 406

background image

Black plate (123,1)

9. Press the eyebolt against the sector

gear.

Sector gear

Eyebolt

Guide

10. Press and rotate the sector gear

rearward to release the lock.

Sector gear

Eyebolt

Guide

CAUTION

When releasing the sector gear lock
using the eyebolt, make sure the eyebolt
remains centered as you push it against
the sector gear lock. If the eyebolt slips
it could cause your hand to veer and hit
the vehicle resulting in minor scrapes or
bruises.

11. Pull out the eyebolt from the guide

when the lock is released.

12. Do the same procedure on the other

side.

13. Lift up the deck using two adults, one

on each side of the vehicle, and open
the deck completely.

CAUTION

l

Lift the deck using two adults. Doing
it alone could result in injury or the
deck lid mechanism being twisted
which could damage it.

l

Do not let go of the deck lid on both
sides until it is fully open. The deck
lid could fall if it is released too soon
and cause injury.

l

Do not attempt to forcefully lift the
deck. If the lock has not detached
and the deck is forcefully lifted, it
could damage the deck.

Knowing Your Mazda

Doors and Locks

3-65

MX-5_8V80-EA-06F_Edition3 Page123
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

«
...
121
122
123
124
125
...
»

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 MX-5 Miata

Brand: Daihatsu Pages: 340

Brand: Back View Pages: 168

PRIME DESIGN VCR 326

Brand: Safe Fleet Pages: 16

Prime Design VBC PC11

Brand: Safe Fleet Pages: 8

Prime Design AR1418

Brand: Safe Fleet Pages: 4

Brand: Yakima Pages: 7

Brand: Yakima Pages: 6

Brand: Yakima Pages: 10

Brand: Yakima Pages: 12

Retrotech RTX-68D-CHG

Brand: Dakota Digital Pages: 4

Brand: FORM FIT Pages: 2

Edge Flush Rail

Brand: Thule Pages: 12

Brand: FORM FIT Pages: 2

Brand: Haibang Pages: 6

Lippert Components LEVELEGS MPD 66385

Brand: Atwood Pages: 6

65 41 2 152 528

Brand: BMW Pages: 21

Brand: ECS Electronics Pages: 16

Brand: Atera Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands