Mazda 2007 MX-5 Miata Manual Download Page 397

Page: 397 / 406

Black plate (397,1)

Capacities

(Approximate Quantities)

Item

Capacity

Engine oil

With oil filter
replacement

4.3 L (4.5 US qt, 3.8 Imp qt)

Without oil filter
replacement

3.9 L (4.1 US qt, 3.4 Imp qt)

Coolant

7.5 L (7.9 US qt, 6.6 Imp qt)

Manual transmission oil

5-speed transmission

2.0 L (2.1 US qt, 1.8 Imp qt)

6-speed transmission

2.1 L (2.2 US qt, 1.8 Imp qt)

Automatic transmission fluid

7.4 L (7.8 US qt, 6.5 Imp qt)

Rear differential oil

0.7 L (0.7 US qt, 0.6 Imp qt)

Fuel tank

48 L (12.7 US gal, 10.6 Imp gal)

Check oil and fluid levels with dipsticks or reservoir gauges.

Dimensions

Item

Vehicle specification

Overall length

With license plate holder

3,995 mm (157.3 in)

Without license plate holder

3,990 mm (157.1 in)

Overall width

1,720 mm (67.7 in)

Overall height

Soft top

1,245 mm (49.0 in)

Hardtop

1,255 mm (49.4 in)

Track, front

1,490 mm (58.7 in)

Track, rear

1,495 mm (58.9 in)

Wheelbase

2,330 mm (91.7 in)

Weights

Item

Weight

Without power retractable

hardtop

With power retractable

hardtop

GVWR (Gross Vehicle Weight Rating)

1,396 kg (3,078 lbs)

1,416 kg (3,122 lbs)

GAWR (Gross Axle Weight Rating)

Front

714 kg (1,574 lbs)

Rear

682 kg (1,504 lbs)

702 kg (1,548 lbs)

Air Conditioner

Gas complies with SAE J639

Maximum operating charge

HFC134a (R-134a)

0.45 kg (1.0 lb)

Specifications

10-5

MX-5_8V80-EA-06F_Edition3 Page397
Tuesday, August 29 2006 10:26 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands

Mazda 2007 MX-5 Miata, Manual

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Related manuals for 2007 MX-5 Miata

Brands by name

Popular brands