Mazda 2007 MX-5 Miata Manual Download Page 272

Page: 272 / 406

Black plate (272,1)

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transmission in Park (P), a manual
transmission in Reverse (R) or 1, and
turn off the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle

and away from the vehicle and traffic.

5. Remove the jack, and tool (page 7-5).

6. Block the wheel diagonally opposite

the tire to be changed. When blocking
a wheel, place a tire block both in front
and behind the tire.

NOTE

When blocking a tire, use rocks or
wood blocks of sufficient size to hold
the tire in place.

Removing a Tire

1. Loosen the lug nuts by turning them

counterclockwise one turn each, but
don't remove any until the tire has been
raised off the ground.

2. Place the jack under the jacking

position closest to the tire being
changed.

Jacking position

7-14

In Case of an Emergency

Flat Tire

MX-5_8V80-EA-06F_Edition3 Page272
Tuesday, August 29 2006 10:24 AM

Form No.8V80-EA-06F

Summary of Contents for 2007 MX-5 Miata























































































































































































































































































































































































































Search results

Summary of Contents for 2007 MX-5 Miata

Reviews:

Mazda 2007 MX-5 Miata, Manual, Page: 272 / 406

Search results

Summary of Contents for 2007 MX-5 Miata

Reviews: