Masimo Root, Operator'S Manual, Page: 76 / 152

Root Chapter 3: Operation
www.masimo.com 74 Masimo
Capturing Screenshots
To take a screenshot, swipe across the Root screen from right to left using three fingers
simultaneously (see image below). A confirmation flash will appear on the entire screen and
a status message will be displayed briefly at the top of the Root screen. The status message
indicates the filename of the screenshot taken.
Downloading Screenshots
To download the screenshots:
1. Remove any sensors connected to the patient to stop monitoring, and
acknowledge any alarms triggered on Root.
2. Plug the USB drive into one of the two USB ports that are located on the back side
of Root, and the screenshots will automatically begin to download. A status
message will display briefly at the top of the Root screen to indicate the start of
the download.
Note: There must be a folder titled “screen_shot” in the USB drive with a FAT or
FAT32 system file to enable the download of the screenshots.
3. A confirmation status message will display briefly at the top of the Root screen
when the file transfer is complete.
4. Unplug the USB drive from Root.
To import the screenshots from the USB drive onto a computer, open the folder titled
“screen_shot” (from the USB drive) on the computer to access the .png files.