Masimo Root, Operator'S Manual, Page: 30 / 152

Root Chapter 2: Setting Up
www.masimo.com 28 Masimo
Attach the Probe Well
1. Align the probe well with the tabs facing up and down and insert the probe well
into the temperature module.
Note:
The probe well snaps into place when it is fully seated.
2. Insert the temperature probe into the probe well.
Attach the Temperature Probe
1. Hold the temperature probe cable connector with the spring tab on the right and
insert it into the probe port of the temperature module.
2. Push the cable connector into place until it clicks.
3. Place probe cover onto the temperature probe and dock in the probe well.
Attach NIBP Cuff
1. Attach a necessary adapter to the end of the cuff hose.
2. Connect blood pressure cuff to the NIBP Nib located on the side of Root.