Display Mode
RTD Mode
Shows the Current RTD Mode
RTD Measure Mode
RTD Source Mode
RTD Type
Shows the current RTD Type.
Wire Selection
Wire connection for RTD and Resistance Measurement / Source
2W
2 wire connection
3W
3 wire connection
4W
4 wire connection
Reading
Shows the RTD reading according to RTD Type.
STEP/RAMP
Icon
Shows the Icon indicating STEP/RAMP mode. Only applicable if
RTDmode is
SOURCE
.
Manual Step
Rising Ramp
Step UP
Falling Ramp
Step DOWN
Ramp Hold @
0%
Ramp Hold @
100%
Additional Info.
Shows the Addition Information according to RTD Mode &
Additional Info selected in
MENU
→
DISPLAY
→
RTD terminal.
Bar Graph
Horizontal Bar graph according to RTD Percentage Value (0.00% -
100.00%). The value scales according to RTD reading and Input
0% & 100% value as set in
MENU
→
DISPLAY
→
RTD terminal
Menu.
Percentage
Value
The Percentage Value in according to RTD Reading.
Wire Select
Shows which RTD configuration is used. ( 2-wire, 3-wire, 4-wire)
Source Display
Mode
Shows which display mode is selected either percentage or actual.
Actual Value
When display mode percentage Actual value bar display the actual
source value.
I (EX)
When RTD is in source mode it shows the excitation current which
comes from the measure device.
Measure Window
Switch Status
Switch Status Icon
Switch OPEN (OFF)
Switch CLOSE (ON)
Switch OPEN
Displays the Source Reading valueafter the switch OPEN was
detected.
Switch CLOSE
Displays the Source Reading valueafter the switch CLOSE was
detected.
