Automated Step can be started by Pressing
F1
key (START).
After
that
F1
&
F2
key
will
change
to
PAUSE
&
STOP
respectively. So by pressing F1 & F2 key
running STEP can be PAUSE or STOP at any time in RUN
Page.
STEP Setting can be accessed directly by
F2
key (SETTING).
Note:
While STEP is running STEP settings can’t be accessible and Source
Page Parameter settings can’t be change. Stop STEP before
changing any settings
•
RAMP Page:
Parameter Name Description / Options
Hold@0%(s)
Time to wait at Low (0%) level in second.
This parameter is use for
Repeat FormatUP/DOWN
or
DOWN/UP
.
Range:
0 to 9999
Rise Time (s)
Time to Increase from Low to High Level.
Range:
1 to 9999
Hold@100%(s)
Time to wait at High (100%) level in second.
This parameter is use for
Repeat FormatUP/DOWN
or
DOWN/UP
.
Range:
0 to 9999
Fall Time (s)
Time to decrease from High to Low Level.
Range:
1 to 9999
Repeat Format
How the Ramp should be done.
